Name: Whiskey-3 LEFTY Rem 700
SKU: 97
Price: 969.99 USD
Availability: InStock

The Whiskey-3 Chassis (W3C) (Generation 6 Chassis)

Forend:

Polymer, lightened by half a pound.
Threaded mounting holes at various positions, total of 15-20.
Access hole for action mounting screw, so you can remove the action without removing forend.
Side mounting options for rail, flush mount QD sling plate, external QD cup, etc on both sides of forend.

“Backbone”/Chassis:

Utilizes radius bedding, which is CNC'd into aluminum backbone for consistent contact between action and chassis.
Hardened stainless steel recoil lug instead of aluminum ones found on stock T3’s.
Rem 700 version can accommodate most large aftermarket recoil lugs like the Badger Ordnance lug without any or with only slight modification.
Designed for 5 or 10 round AICS magazines (with or without front spacer plate in T3, with spacer plate only in Rem 700 unless you have a modified action); Rem 700 LA now uses CIP length AICS magazines; Badger M2008 version uses AI AW 10round double stack magazines).
Will accept any barrel contour up to 1.25” straight cylinder. We recommend no larger than .9" at muzzle (i.e. Medium Palma/Remington Varmint contour) for weight and proper overall rifle balance.

Trigger Guard/Mag catch:

Similar in shape to TRG trigger guard but made of reinforced polymer instead of Delrin (Tikka T3 chassis uses aluminum triggerguard).
Will accept Barnard trigger for T3 as well as factory trigger.
Rem 700 version will accept the new x-mark triggers and most aftermarket triggers but some aftermarket triggers may require modifications to the trigger or chassis.
Mag catch is our new low profile version which reduces snags while still providing excellent ergonomics and control.

Magazines Used:

Remington 700 short action and Tikka T3 use AICS .308 mag in either 5 or 10 rd capacity. Accuracy International part numbers 3901 and 3902 respectively.
Remington 700 long action and Badger M2008/13 long action gen 5 uses AICS .338 CIP length magazines, AI part number 4808 (bend in feedlips to use with smaller cartidges like .300 WM).
Magazines are not included. We recommend actual Accuracy International magazines or those from Accurate Mag.

Cheekpiece:

Infinitely adjustable within range (1” travel).
Cheekpiece can be quickly removed and re-installed, uses a clamp and thumbscrew design.
Includes a simple feature to make the cheekpiece return to the exact height you set it.
Cheekpiece can be moved forward and backward with several mounting positions.
Cheekpiece made of polymer to not transmit heat to or away from your face.

Length of Pull:

Adjustable in ¼” increments with 2” of adjustment range.
LOP range varies slightly between versions but is roughly 13.3” to 15.3”.
Uses cam lock and set screw to ensure a solid fit.

Buttstock:

CNC milled from billet aluminum.
Entire buttstock assembly can be used on a TRG if you should desire.

Buttpad:

Moves vertically to set positions within range.
Tool-less adjustable.
Buttpad is Remington 700 pattern so user can install aftermarket pre-fit pads.
Buttpad can tilt 15 degrees to each side (as if looking directly from the rear down the bore).

Changes to Gen II from Gen I:

Threaded mounting holes in forend in slightly different position, some are positioned to use the Magpul MOE L2 picatinny rail.
Trigger guard held on by two screws now instead of one screw and a tab.
No holes drilled in barrel channel on Gen II (vent holes).
Grip panels are injection molded reinforced polymer instead of cast polyurethane.
Cheek piece is wider, taller, and more comfortable, and also injection molded.
Bag rider/Butthook is injection molded and included with chassis instead of being optional accessory.
Set screw has been added to top of buttstock to lock down LOP system to eliminate any play.
Bottom of buttstock has been modified to accept Magpul MOE L3 rail instead of L1 rail for more mounting positions, also there are two additional M5 threaded mounting points on the buttstock for more mounting options.

Changes to Gen III from Gen II:

Will accept either our small grip panel option or our regular grip panels readily, whereas the Gen II stocks will require replacement of two metal components to accept the small grip panels.
Fixed stocks can no longer be upgraded to a folding stock after they are purchased.

Stocks which use a .308 sized AICS magazine now have a wider trigger guard which facilitates magazine insertion and the trigger guard has a larger opening for the trigger which means some aftermarket triggers will drop in with no modifications to the chassis.
Stocks have an alternate position for the QD mount point in the buttstock as well as some new mounting positions for other types of sling mounts.
Stocks have new forend mounting points that allow MOE rails and our flush mount QD sling plate to be mounted, and they retain the two hole NV mount of the Gen II.(These were included on later Rem 700 gen 2 stocks).
Length of pull adjustment levers moved to right side to remove possible interference with sling.
Access hole for front action screw is enlarged to allow easier access with a torque wrench (this also means the front action screw is no longer captured).
Weight for the fixed stock has dropped about 5oz to 4lb 10oz for Rem 700 version..
Forends have grooves to keep Harris bipods from twisting.
Front ends have mounting holes specifically meant for solid mounting of our new spigot mount.
Some other changes like slightly revised buttstock design.

Changes for Gen 4:

Additional mount point on side of forend to fit our sling loop (HK style loop)/QD mount.
Five main components of fixed buttstock consolidated into single part.
Single LOP cam with 180 degree rotation to locked position.
Moved lower spar leg forward on buttstock to avoid it hitting non-trigger hand during recoil.
Added clearance for more aftermarket triggers in Rem 700 chassis versions.
Weight has been decreased by several ounces.
Slight cost increase on both configurations to $939 fixed.
Additional minor changes.

Changes for Gen 5:

Forend changed to polymer, weight reduced and magazine well stop incorporated, additional mounting points added
Triggerguard changed to polymer on Remington versions
Mag release button changed to Polymer to reduce inertia
Aluminum backbone lightened
Additional fore/aft mounting points added to cheekpiece
Cheekpiece thumbscrew now captured and molded polymer
Tool-less adjustment for buttpad height and cant added
Reduced weight over 1/2 pound
Cost decrease on Rem 700SA fixed stock to $899 fixed
Additional minor changes.

Overseas Shipments: This is an ITAR restricted item like all gun parts. Export is possible only with the proper permits. We currently have stocking international dealers, please see the "Dealers" section on our home page.

Availability: If you are able to add the item to your cart and checkout, then we have it in stock, barring a system malfunction.

Shipping: We ship as quickly as possible. With chassis it takes 2-3 days, we may send out a shipping notice/tracking number but we don’t do this for all items. If it has been two weeks and you have not received your order, feel free to send us an email at info@krg-ops.com

We offer a military and LE discount (active duty mil and vets and POST certified LE with PD/SO/Agency) on the products we manufacture, to receive the discount amount and codes, please see the FAQ section.

Manufacture: Our products are made in the USA by hard working Americans

Chassis typically include a sling/bipod stud and polymer L2 (5 slot) rail. No chassis come with an AICS magazine included.

Whiskey-3 LEFTY Rem 700

Whiskey-3 Fixed Lefty Chassis shown on Defiance (Rem 700 style) Long Action with Arca Spigot XL and KRG Arca Clamp

Whiskey-3 Fixed Lefty Chassis shown on Defiance (Rem 700 style) Long Action with Arca Spigot XL and KRG Arca Clamp

Whiskey-3 Chassis shown as it ships with included large grips, MOE L2 rail, and fasteners

Whiskey-3 Folding Chassis shown on Remington 700 with Enclosed Forend and Machined Thumbscrew kit for the rear ergonomic adjustments, both available separately

Whiskey-3 fixed chassis in black, as it ships

Whiskey-3 folder in black color on SOTIC Rifle with included large grips (small grips installed as it ships)

Closeup of Whiskey-3 folding rear half in black on Remington 700 clone; Machined Thumbscrew kit visible, available as accessory item

Closeup of Whiskey-3 chassis with KRG accessory item Enclosed Forend added, plus non KRG items